Pianos consistently make movers annual list of items that are most regularly damaged. Grand pianos are especially troublesome. Practicing the following procedures for disassembling, cushioning and packing grand pianos will avoid damage, lower claims cost, and improve consumer complete satisfaction.
1) At least three individuals are needed to manage a child grand piano. If the baby grand piano requires to go up or down stairs or if a complete or show grand piano requires to be transferred, a minimum of 4 people are required.
2) Always finish a precise and extensive inventory. It may be essential or more suitable to use a visual stock to effectively describe and reveal pre-existing damage.
3) As different parts are dismantled, please location all hardware in a correctly labeled parts bag and then put the parts bag in a "Components Box".
4) Eliminate the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a tidy furnishings pad.
5) Disconnect the cover by eliminating the hinge pins. Wrap the lid in a clean furniture pad.
6) Remove the prop that holds the cover open and wrap it in a clean furnishings pad. The prop has a hinge pin and is in two pieces.
7) Remove the pedal assembly and cover it in a clean furniture pad. When getting rid of the screws, please be careful not to drop the braces. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by positioning a piece of masking tape with the appropriate number on each rod.
8) Pad the piano by putting a tidy rolled furniture pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to avoid it from tumbling open while you handle the piano. Cover the top of the piano with two clean furniture pads, nicely folded around the keyboard. Usage rubber bands to secure the pads. Note: Please guarantee that the surface area of the piano is dust-free prior to padding it. Padding an extremely sleek surface that is dusty may trigger great scratches, especially on a black lacquer finish.
9) Position a piano board and connect the straps so that it is all set to get the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Eliminate the left front leg by positioning a single person underneath the piano at the left end of the keyboard. The other 2 individuals need to support the left front corner. The individual beneath the piano must turn the maintaining block so that the long end points far from the leg. The screws, if there are any, ought to then be removed. The "below" individual must then get out from under the piano prior to really removing the leg. Make certain to have two individuals lifting the corner of the piano while the third individual removes the leg. Keep in mind: Please make sure to keep in mind which legs were eliminated from which positions since some pianos have legs that are not interchangeable.
11) Location the piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to raise the whole piano somewhat while finishing this maneuver to avoid unnecessary pressure on the staying, attached legs as the piano suggestions. Be sure that the piano is centered snugly against the brace at the end of the piano board.
12) Remove the 2 remaining legs and wrap them in clean furnishings pads. These legs are kept in location by a "crucial and slot" plan. To eliminate the leg, slide it inward toward the center of the my response piano up until it comes out of the slot.
13) Secure the piano to the piano board by bringing the ends of the straps together and attaching them. Location folded burlap pads over the furnishings pads but under the straps to provide extra security to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, connect the loose ends of the two straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for defense versus house damage, put the keyboard end of the piano toward the bottom of the stairs. Connect a bulge strap to the leading end of the piano board to avoid the piano from slipping.
16) To pack the piano, leave it on the piano board and place it in a tier as the very first base item with the keyboard facing the wall of the preceding tier. The finest place to fill the padded lid is in between the piano and the preceding tier or between the wall and the piano.
Grand pianos represent a considerable obstacle, they can be moved without damage by using common sense and practicing the procedures noted above.